First, the product characteristics
1 This product is at room temperature curing two-component epoxy adhesive. Can be used for bonding between the metal and nonmetal large area of acid, alkali glass fiber reinforced plastic anti-corrosion construction adhesives. Has good adhesion and excellent chemical physical properties.
2, the shear strength ¡Ý 21Mpa
3, the uneven pull away from the intensity of ¡Ý 200N/cm
Second, the use
1, the clean surface to be bonded
2, A and B two sets of 2:1 ratio by weight were thoroughly mixed, mix to sizing.
Third, pay attention
1, A and B will use two lids were tightened, the next use continue to be valid.
2, A and B mixing occurs when two copies of the curing reaction. Generally used within 30 minutes. Existing service is used, the configuration should not be too large.
Fourth, packaging and storage
1,10 KG, 20KG iron drum or plastic drum.
2, the storage should be placed in dry and ventilated place, sealed. Shelf life: 1 year
3, is strictly prohibited during transport heat, sun, rain. |
